Heuristic algorithms: Difference between revisions

From Cornell University Computational Optimization Open Textbook - Optimization Wiki
Jump to navigation Jump to search
No edit summary
 
(16 intermediate revisions by 2 users not shown)
Line 1: Line 1:
Author: Anmol Singh (as2753)
Author: Anmol Singh (as2753) (ChemE 6800 Fall 2020)
 
Steward: Fengqi You, Allen Yang


== Introduction ==
== Introduction ==
In mathematical programming, a heuristic algorithm is a procedure that determines near-optimal solutions to an optimization problem. However, this is achieved by trading optimality, completeness, accuracy, or precision for speed.<ref> Eiselt, Horst A et al. Integer Programming And Network Models. Springer, 2011.</ref> Nevertheless, heuristics is a widely used technique for a variety of reasons:
In mathematical programming, a heuristic algorithm is a procedure that determines near-optimal solutions to an optimization problem. However, this is achieved by trading optimality, completeness, accuracy, or precision for speed.<ref> Eiselt, Horst A et al. Integer Programming and Network Models. Springer, 2011.</ref> Nevertheless, heuristics is a widely used technique for a variety of reasons:


*Problems that do not have an exact solution or for which the formulation is unknown
*Problems that do not have an exact solution or for which the formulation is unknown
Line 16: Line 14:
''Introduction to Algorithms'' (Cormen, Leiserson, Rivest, and Stein) 2001, Chapter 16 "Greedy Algorithms".</ref> It is a technique used to solve the famous “traveling salesman problem” where the heuristic followed is: "At each step of the journey, visit the nearest unvisited city."  
''Introduction to Algorithms'' (Cormen, Leiserson, Rivest, and Stein) 2001, Chapter 16 "Greedy Algorithms".</ref> It is a technique used to solve the famous “traveling salesman problem” where the heuristic followed is: "At each step of the journey, visit the nearest unvisited city."  


====Example 1: Scheduling Problem====
====Example: Scheduling Problem====
''You are given a set of N schedules of lectures for a single day at a university. The schedule for a specific lecture is of the form (s time, f time) where s time represents the start time for that lecture and similarly, the f time represents the finishing time. Given a list of N lecture schedules, we need to select maximum set of lectures to be held out during the day such that none of the lectures overlaps with one another i.e. if lecture Li and Lj are included in our selection then the start time of j >= finish time of i or vice versa.''
You are given a set of N schedules of lectures for a single day at a university. The schedule for a specific lecture is of the form (s time, f time) where s time represents the start time for that lecture, and similarly, the f time represents the finishing time. Given a list of N lecture schedules, we need to select a maximum set of lectures to be held out during the day such that none of the lectures overlaps with one another i.e. if lecture L<sub>i</sub> and L<sub>j</sub> are included in our selection then the start time of j finish time of i or vice versa. The most optimal solution to this would be to consider the earliest finishing time first. We would sort the intervals according to the increasing order of their finishing times and then start selecting intervals from the very beginning.  
 
Solution: The most optimal solution to this would be to consider the earliest finishing time first. We sort the intervals according to increasing order of their finishing times and then we start selecting intervals from the very beginning. The pseudo-code is as follows:
 
<code>function interval_scheduling_problem(requests)</code>
 
<code>schedule \gets \{\}</code>
 
<code>while requests is not yet empty</code>
   
<code>choose a request i_r \in requests that has the lowest finishing time</code>
 
<code>schedule \gets schedule \cup \{i_r\}</code>
 
<code>delete all requests in requests that are not compatible with i_r</code>
 
<code>end</code>
 
<code>return schedule</code>
 
<code>end</code>
 
<code>function interval_scheduling_problem(requests)
    schedule \gets \{\}
    while requests is not yet empty
        choose a request i_r \in requests that has the lowest finishing time
        schedule \gets schedule \cup \{i_r\}
        delete all requests in requests that are not compatible with i_r
    end
    return schedule
end</code>


===Local Search methods===
===Local Search methods===
Local Search method follows an iterative approach where we start with some initial solution, explore the neighborhood of the current solution, and then replace the current solution with a better solution.<ref> Eiselt, Horst A et al. Integer Programming And Network Models. Springer, 2011.</ref> For this method, the “traveling salesman problem” would follow the heuristic in which a solution is a cycle containing all nodes of the graph and the target is to minimize the total length of the cycle.
The Local Search method follows an iterative approach where we start with some initial solution, explore the neighborhood of the current solution, and then replace the current solution with a better solution.<ref> Eiselt, Horst A et al. Integer Programming and Network Models. Springer, 2011.</ref> For this method, the “traveling salesman problem” would follow the heuristic in which a solution is a cycle containing all nodes of the graph and the target is to minimize the total length of the cycle.


==== Example Problem  ====
==== Example Problem  ====
Line 74: Line 42:


===Tabu Search Algorithm===
===Tabu Search Algorithm===
Tabu search (TS) is a heuristic algorithm created by Fred Glover<ref>Fred Glover (1986). "Future Paths for Integer Programming and Links to Artificial Intelligence". Computers and Operations Research. '''13''' (5): 533–549,https://doi.org/10.1016/0305-0548(86)90048-1</ref> using a gradient-descent search with memory techniques to avoid cycling for determining an optimal solution. It does so by forbidding or penalizing moves which take the solution, in the next iteration, to points in the solution space previously visited. The algorithm spends some memory to keep a Tabu list of forbidden moves, which are the moves of the previous iterations or moves that might be considered unwanted. A general algorithm is as follows<ref>Optimization of Preventive Maintenance Program for Imaging Equipment in Hospitals, Editor(s): Zdravko Kravanja, Miloš Bogataj, Computer-Aided Chemical Engineering, Elsevier, Volume 38, 2016, Pages 1833-1838, ISSN 1570-7946, <nowiki>ISBN 9780444634283</nowiki>, https://doi.org/10.1016/B978-0-444-63428-3.50310-6.</ref>:  
Tabu search (TS) is a heuristic algorithm created by Fred Glover<ref>Fred Glover (1986). "Future Paths for Integer Programming and Links to Artificial Intelligence". Computers and Operations Research. '''13''' (5): 533–549,https://doi.org/10.1016/0305-0548(86)90048-1</ref> using a gradient-descent search with memory techniques to avoid cycling for determining an optimal solution. It does so by forbidding or penalizing moves that take the solution, in the next iteration, to points in the solution space previously visited. The algorithm spends some memory to keep a Tabu list of forbidden moves, which are the moves of the previous iterations or moves that might be considered unwanted. A general algorithm is as follows<ref>Optimization of Preventive Maintenance Program for Imaging Equipment in Hospitals, Editor(s): Zdravko Kravanja, Miloš Bogataj, Computer-Aided Chemical Engineering, Elsevier, Volume 38, 2016, Pages 1833-1838, ISSN 1570-7946, <nowiki>ISBN 9780444634283</nowiki>, https://doi.org/10.1016/B978-0-444-63428-3.50310-6.</ref>:  


1.     Select an initial solution ''s''<sub>0</sub> ∈ ''S''. Initialize the Tabu List ''L''<sub>0</sub> = ∅ and select a list tabu size. Establish ''k'' = 0.
1.     Select an initial solution ''s''<sub>0</sub> ∈ ''S''. Initialize the Tabu List ''L''<sub>0</sub> = ∅ and select a list tabu size. Establish ''k'' = 0.
Line 97: Line 65:
5.     The total cost of the routes is minimized
5.     The total cost of the routes is minimized


A feasible solution for the problem thus consists in a partition of the customers into m groups, each of total demand no larger than ''Q'', that are sequenced to yield routes (starting and ending at the depot) of duration no larger than ''L''.
A feasible solution for the problem thus consists of a partition of the customers into m groups, each of total demand no larger than ''Q'', that are sequenced to yield routes (starting and ending at the depot) of duration no larger than ''L''.


===Simulated Annealing Algorithm===
===Simulated Annealing Algorithm===
Line 112: Line 80:
5.    If an equilibrium condition is satisfied, go to (6), otherwise jump back to (3).
5.    If an equilibrium condition is satisfied, go to (6), otherwise jump back to (3).


6.    If termination conditions are not met, decrease the temperature according to a certain cooling scheme and jump back to (1). If the termination conditions are satisfied, stop calculations accepting the current best value '''''X'''''<sup>*</sup> as the final (‘optimal’) solution.  
6.    If termination conditions are not met, decrease the temperature according to a certain cooling scheme and jump back to (1). If the termination conditions are satisfied, stop calculations accepting the current best value '''''X'''''<sup>*</sup> as the final (‘optimal’) solution.
 
== Numerical Example: Knapsack Problem ==
One of the most common applications of the heuristic algorithm is the Knapsack Problem, in which a given set of items (each with a mass and a value) are grouped to have a maximum value while being under a certain mass limit. It uses the Greedy Approximation Algorithm to sort the items based on their value per unit mass and then includes the items with the highest value per unit mass if there is still space remaining.
 
'''<big>Example</big>'''
 
The following table specifies the weights and values per unit of five different products held in storage. The quantity of each product is unlimited. A plane with a weight capacity of 13 is to be used, for one trip only, to transport the products. We would like to know how many units of each product should be loaded onto the plane to maximize the value of goods shipped. 
{| class="wikitable"
|+
!
Product (i)
!Weight per unit (w<sub>i</sub>)
!Value per unit (v<sub>i</sub>)
|-
|1
|7
|9
|-
|2
|5
|4
|-
|3
|4
|3
|-
|4
|3
|2
|-
|5
|1
|0.5
|}
'''<big>Solution:</big>'''
 
'''(a) Stages:'''
 
We view each type of product as a stage, so there are 5 stages. We can also add a sixth stage representing the endpoint after deciding
 
'''(b) States:'''
 
We can view the remaining capacity as states, so there are 14 states in each stage: 0,1, 2, 3, …13
 
'''(c) Possible decisions at each stage:'''
 
Suppose we are in state s in stage n (n < 6), hence there are s capacity remaining. Then the possible number of items we can pack is:
 
j = 0, 1, …[s/w<sub>n</sub>]
 
For each such action j, we can have an arc going from the state s in stage n to the state n – j*w<sub>n</sub> in stage n + 1. For each arc in the graph, there is a corresponding benefit j*v<sub>n</sub>. We are trying to find a maximum benefit path from state 13 in stage 1, to stage 6.
 
'''(d) Optimization function:'''
 
Let f<sub>n</sub>(s) be the value of the maximum benefit possible with items of type n or greater using total capacity at most s
 
'''(e) Boundary conditions:'''
 
The sixth stage should have all zeros, that is, f<sub>6</sub>(s) = 0 for each s = 0,1, … 13
 
'''(f) Recurrence relation:'''
 
f<sub>n</sub>(s) = max {j*v<sub>n</sub> + f<sub>n+1</sub>(s – j*w<sub>n</sub>)}, j = 0, 1, …, [s/w<sub>n</sub>]
 
'''(g) Compute:'''
 
The solution will not show all the computations steps. Instead, only a few cases are given below to illustrate the idea.
 
* For stage 5, f<sub>5</sub>(s) = max<sub>j=0, 1, …[s/1]</sub> {j*0.5 + 0} = 0.5s because given the all zero states in stage 6, the maximum possible value is to use up all the remaining s capacity.
* For stage 4, state 7,
 
f<sub>4</sub>(7) = max<sub>j=0,1, …, [7/w4]</sub> = {j*v<sub>4</sub> + f<sub>5</sub>(7 - w<sub>4*</sub>j)}
 
= max {0 + 3.5; 2 + 2; 4 + 0.5}
 
= 4.5
 
Using the recurrence relation above, we get the following table:
{| class="wikitable"
|+
!Unused Capacity
s
!f<sub>1</sub>(s)
!Type 1
opt
!f<sub>2</sub>(s)
!Type 2
opt
!f<sub>3</sub>(s)
!Type 3
opt
!f<sub>4</sub>(s)
!Type 4
opt
!f<sub>5</sub>(s)
!Type 5
opt
!f<sub>6</sub>(s)
|-
|13
|13.5
|1
|10
|2
|9.5
|3
|8.5
|4
|6.5
|13
|0
|-
|12
|13
|1
|9
|2
|9
|3
|8
|4
|6
|12
|0
|-
|11
|12
|1
|8.5
|2
|8
|2
|7
|3
|5.5
|11
|0
|-
|10
|11
|1
|8
|2
|7
|2
|6.5
|3
|5
|10
|0
|-
|9
|10
|1
|7
|1
|6.5
|2
|6
|3
|4.5
|9
|0
|-
|8
|9.5
|1
|6
|1
|6
|2
|5
|2
|4
|8
|0
|-
|7
|9
|1
|5
|1
|5
|1
|4.5
|2
|3.5
|7
|0
|-
|6
|4.5
|0
|4.5
|1
|4
|1
|4
|2
|3
|6
|0
|-
|5
|4
|0
|4
|1
|3.5
|1
|3
|1
|2.5
|5
|0
|-
|4
|3
|0
|3
|0
|3
|1
|2.5
|1
|2
|4
|0
|-
|3
|2
|0
|2
|0
|2
|0
|2
|1
|1.5
|3
|0
|-
|2
|1
|0
|1
|0
|1
|0
|1
|0
|1
|2
|0
|-
|1
|0.5
|0
|0.5
|0
|0.5
|0
|0.5
|0
|0.5
|1
|0
|-
|0
|0
|0
|0
|0
|0
|0
|0
|0
|0
|0
|0
|}
'''Optimal solution:''' The maximum benefit possible is 13.5. Tracing forward to get the optimal solution: the optimal decision corresponding to the entry 13.5 for f<sub>1</sub>(1) is 1, therefore we should pack 1 unit of type 1. After that we have 6 capacity remaining, so look at f<sub>2</sub>(6) which is 4.5, corresponding to the optimal decision of packing 1 unit of type 2. After this, we have 6-5 = 1 capacity remaining, and f<sub>3</sub>(1) = f<sub>4</sub>(1) = 0, which means we are not able to pack any type 3 or type 4. Hence we go to stage 5 and find that f<sub>5</sub>(1) = 1, so we should pack 1 unit of type 5. This gives the entire optimal solution as can be seen in the table below:
{| class="wikitable"
|+
! colspan="2" |Optimal solution
|-
!Product (i)
!Number of units
|-
|1
|1
|-
|2
|1
|-
|5
|1
|}
 
==Applications==
==Applications==
Heuristic algorithms have become an important technique in solving current real-world problems. Its applications can range from optimizing the power flow in modern power systems<ref> NIU, M., WAN, C. & Xu, Z. A review on applications of heuristic optimization algorithms for optimal power flow in modern power systems. J. Mod. Power Syst. Clean Energy 2, 289–297 (2014), https://doi.org/10.1007/s40565-014-0089-4</ref> to groundwater pumping simulation models<ref> J. L. Wang, Y. H. Lin and M. D. Lin, "Application of heuristic algorithms on groundwater pumping source identification problems," 2015 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM), Singapore, 2015, pp. 858-862, https://doi: 10.1109/IEEM.2015.7385770.</ref>. Heuristic optimization techniques are increasingly applied in environmental engineering applications as well such as the design of a multilayer sorptive barrier system for landfill liner.<ref>Matott, L. Shawn, et al. “Application of Heuristic Optimization Techniques and Algorithm Tuning to Multilayered Sorptive Barrier Design.” Environmental Science &amp; Technology, vol. 40, no. 20, 2006, pp. 6354–6360., https://doi.org/10.1021/es052560+.</ref> Heuristic algorithms have also been applied in the fields of bioinformatics, computational biology, and systems biology.<ref>Larranaga P, Calvo B, Santana R, Bielza C, Galdiano J, Inza I, Lozano JA, Armananzas R, Santafe G, Perez A, Robles V (2006) Machine learning in bioinformatics. Brief Bioinform 7(1):86–112 </ref>
Heuristic algorithms have become an important technique in solving current real-world problems. Its applications can range from optimizing the power flow in modern power systems<ref> NIU, M., WAN, C. & Xu, Z. A review on applications of heuristic optimization algorithms for optimal power flow in modern power systems. J. Mod. Power Syst. Clean Energy 2, 289–297 (2014), https://doi.org/10.1007/s40565-014-0089-4</ref> to groundwater pumping simulation models<ref> J. L. Wang, Y. H. Lin and M. D. Lin, "Application of heuristic algorithms on groundwater pumping source identification problems," 2015 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM), Singapore, 2015, pp. 858-862, https://doi.org/10.1109/IEEM.2015.7385770.</ref>. Heuristic optimization techniques are increasingly applied in environmental engineering applications as well such as the design of a multilayer sorptive barrier system for landfill liner.<ref>Matott, L. Shawn, et al. “Application of Heuristic Optimization Techniques and Algorithm Tuning to Multilayered Sorptive Barrier Design.” Environmental Science &amp; Technology, vol. 40, no. 20, 2006, pp. 6354–6360., https://doi.org/10.1021/es052560+.</ref> Heuristic algorithms have also been applied in the fields of bioinformatics, computational biology, and systems biology.<ref>Larranaga P, Calvo B, Santana R, Bielza C, Galdiano J, Inza I, Lozano JA, Armananzas R, Santafe G, Perez A, Robles V (2006) Machine learning in bioinformatics. Brief Bioinform 7(1):86–112 </ref>


==Conclusion==
==Conclusion==
Heuristic algorithms are not a panacea, but they are handy tools to be used when the use of exact methods cannot be implemented. Heuristics can provide flexible techniques to solve hard problems with the advantage of simple implementation and low computational cost. Over the years, we have seen a progression in heuristics with the development of hybrid systems that combine selected features from various types of heuristic algorithms such as tabu search, simulated annealing and genetic or evolutionary computing. Future research will continue to expand the capabilities of existing heuristics to solve complex real-world problems.
Heuristic algorithms are not a panacea, but they are handy tools to be used when the use of exact methods cannot be implemented. Heuristics can provide flexible techniques to solve hard problems with the advantage of simple implementation and low computational cost. Over the years, we have seen a progression in heuristics with the development of hybrid systems that combine selected features from various types of heuristic algorithms such as tabu search, simulated annealing, and genetic or evolutionary computing. Future research will continue to expand the capabilities of existing heuristics to solve complex real-world problems.


==References==
==References==
<references />
<references />

Latest revision as of 06:37, 21 December 2020

Author: Anmol Singh (as2753) (ChemE 6800 Fall 2020)

Introduction

In mathematical programming, a heuristic algorithm is a procedure that determines near-optimal solutions to an optimization problem. However, this is achieved by trading optimality, completeness, accuracy, or precision for speed.[1] Nevertheless, heuristics is a widely used technique for a variety of reasons:

  • Problems that do not have an exact solution or for which the formulation is unknown
  • The computation of a problem is computationally intensive
  • Calculation of bounds on the optimal solution in branch and bound solution processes

Methodology

Optimization heuristics can be categorized into two broad classes depending on the way the solution domain is organized:

Construction methods (Greedy algorithms)

The greedy algorithm works in phases, where the algorithm makes the optimal choice at each step as it attempts to find the overall optimal way to solve the entire problem.[2] It is a technique used to solve the famous “traveling salesman problem” where the heuristic followed is: "At each step of the journey, visit the nearest unvisited city."

Example: Scheduling Problem

You are given a set of N schedules of lectures for a single day at a university. The schedule for a specific lecture is of the form (s time, f time) where s time represents the start time for that lecture, and similarly, the f time represents the finishing time. Given a list of N lecture schedules, we need to select a maximum set of lectures to be held out during the day such that none of the lectures overlaps with one another i.e. if lecture Li and Lj are included in our selection then the start time of j ≥ finish time of i or vice versa. The most optimal solution to this would be to consider the earliest finishing time first. We would sort the intervals according to the increasing order of their finishing times and then start selecting intervals from the very beginning.

Local Search methods

The Local Search method follows an iterative approach where we start with some initial solution, explore the neighborhood of the current solution, and then replace the current solution with a better solution.[3] For this method, the “traveling salesman problem” would follow the heuristic in which a solution is a cycle containing all nodes of the graph and the target is to minimize the total length of the cycle.

Example Problem

Suppose that the problem P is to find an optimal ordering of N jobs in a manufacturing system. A solution to this problem can be described as an N-vector of job numbers, in which the position of each job in the vector defines the order in which the job will be processed. For example, [3, 4, 1, 6, 5, 2] is a possible ordering of 6 jobs, where job 3 is processed first, followed by job 4, then job 1, and so on, finishing with job 2. Define now M as the set of moves that produce new orderings by the swapping of any two jobs. For example, [3, 1, 4, 6, 5, 2] is obtained by swapping the positions of jobs 4 and 1.

Popular Heuristic Algorithms

Genetic Algorithm

The term Genetic Algorithm was first used by John Holland.[4] They are designed to mimic the Darwinian theory of evolution, which states that populations of species evolve to produce more complex organisms and fitter for survival on Earth. Genetic algorithms operate on string structures, like biological structures, which are evolving in time according to the rule of survival of the fittest by using a randomized yet structured information exchange. Thus, in every generation, a new set of strings is created, using parts of the fittest members of the old set.[5] The algorithm terminates when the satisfactory fitness level has been reached for the population or the maximum generations have been reached. The typical steps are[6]:

1.     Choose an initial population of candidate solutions

2.     Calculate the fitness, how well the solution is, of each individual

3.     Perform crossover from the population. The operation is to randomly choose some pair of individuals like parents and exchange so parts from the parents to generate new individuals

4.     Mutation is to randomly change some individuals to create other new individuals

5.     Evaluate the fitness of the offspring

6.     Select the survive individuals

7.    Proceed from 3 if the termination criteria have not been reached

Tabu Search Algorithm

Tabu search (TS) is a heuristic algorithm created by Fred Glover[7] using a gradient-descent search with memory techniques to avoid cycling for determining an optimal solution. It does so by forbidding or penalizing moves that take the solution, in the next iteration, to points in the solution space previously visited. The algorithm spends some memory to keep a Tabu list of forbidden moves, which are the moves of the previous iterations or moves that might be considered unwanted. A general algorithm is as follows[8]:

1.     Select an initial solution s0S. Initialize the Tabu List L0 = ∅ and select a list tabu size. Establish k = 0.

2.     Determine the neighborhood feasibility N(sk) that excludes inferior members of the tabu list Lk.

3.     Select the next movement sk + 1 from N(Sk) or Lk if there is a better solution and update Lk + 1

4.     Stop if a condition of termination is reached, else, k = k + 1 and return to 1

Example: The Classical Vehicle Routing Problem

Vehicle Routing Problems have very important applications in distribution management and have become some of the most studied problems in the combinatorial optimization literature. These include several Tabu Search implementations that currently rank among the most effective. The Classical Vehicle Routing Problem (CVRP) is the basic variant in that class of problems. It can formally be defined as follows. Let G = (V, A) be a graph where V is the vertex set and A is the arc set. One of the vertices represents the depot at which a fleet of identical vehicles of capacity Q is based, and the other vertices customers that need to be serviced. With each customer vertex vi are associated a demand qi and a service time ti. With each arc (vi, vj) of A are associated a cost cij and a travel time tij.[9] The CVRP consists of finding a set of routes such that:

1.     Each route begins and ends at the depot

2.     Each customer is visited exactly once by exactly one route

3.     The total demand of the customers assigned to each route does not exceed Q

4.     The total duration of each route (including travel and service times) does not exceed a specified value L

5.     The total cost of the routes is minimized

A feasible solution for the problem thus consists of a partition of the customers into m groups, each of total demand no larger than Q, that are sequenced to yield routes (starting and ending at the depot) of duration no larger than L.

Simulated Annealing Algorithm

The Simulated Annealing Algorithm was developed by Kirkpatrick et. al. in 1983[10] and is based on the analogy of ideal crystals in thermodynamics. The annealing process in metallurgy can make particles arrange themselves in the position with minima potential as the temperature is slowly decreased. The Simulation Annealing algorithm mimics this mechanism and uses the objective function of an optimization problem instead of the energy of a material to arrive at a solution. A general algorithm is as follows[11] :

1.    Fix initial temperature (T0)

2.    Generate starting point x0 (this is the best point X* at present)

3.    Generate randomly point XS (neighboring point)

4.    Accept XS as X* (currently best solution) if an acceptance criterion is met. This must be such a condition that the probability of accepting a worse point is greater than zero, particularly at higher temperatures

5.    If an equilibrium condition is satisfied, go to (6), otherwise jump back to (3).

6.    If termination conditions are not met, decrease the temperature according to a certain cooling scheme and jump back to (1). If the termination conditions are satisfied, stop calculations accepting the current best value X* as the final (‘optimal’) solution.

Numerical Example: Knapsack Problem

One of the most common applications of the heuristic algorithm is the Knapsack Problem, in which a given set of items (each with a mass and a value) are grouped to have a maximum value while being under a certain mass limit. It uses the Greedy Approximation Algorithm to sort the items based on their value per unit mass and then includes the items with the highest value per unit mass if there is still space remaining.

Example

The following table specifies the weights and values per unit of five different products held in storage. The quantity of each product is unlimited. A plane with a weight capacity of 13 is to be used, for one trip only, to transport the products. We would like to know how many units of each product should be loaded onto the plane to maximize the value of goods shipped.

Product (i)

Weight per unit (wi) Value per unit (vi)
1 7 9
2 5 4
3 4 3
4 3 2
5 1 0.5

Solution:

(a) Stages:

We view each type of product as a stage, so there are 5 stages. We can also add a sixth stage representing the endpoint after deciding

(b) States:

We can view the remaining capacity as states, so there are 14 states in each stage: 0,1, 2, 3, …13

(c) Possible decisions at each stage:

Suppose we are in state s in stage n (n < 6), hence there are s capacity remaining. Then the possible number of items we can pack is:

j = 0, 1, …[s/wn]

For each such action j, we can have an arc going from the state s in stage n to the state n – j*wn in stage n + 1. For each arc in the graph, there is a corresponding benefit j*vn. We are trying to find a maximum benefit path from state 13 in stage 1, to stage 6.

(d) Optimization function:

Let fn(s) be the value of the maximum benefit possible with items of type n or greater using total capacity at most s

(e) Boundary conditions:

The sixth stage should have all zeros, that is, f6(s) = 0 for each s = 0,1, … 13

(f) Recurrence relation:

fn(s) = max {j*vn + fn+1(s – j*wn)}, j = 0, 1, …, [s/wn]

(g) Compute:

The solution will not show all the computations steps. Instead, only a few cases are given below to illustrate the idea.

  • For stage 5, f5(s) = maxj=0, 1, …[s/1] {j*0.5 + 0} = 0.5s because given the all zero states in stage 6, the maximum possible value is to use up all the remaining s capacity.
  • For stage 4, state 7,

f4(7) = maxj=0,1, …, [7/w4] = {j*v4 + f5(7 - w4*j)}

= max {0 + 3.5; 2 + 2; 4 + 0.5}

= 4.5

Using the recurrence relation above, we get the following table:

Unused Capacity

s

f1(s) Type 1

opt

f2(s) Type 2

opt

f3(s) Type 3

opt

f4(s) Type 4

opt

f5(s) Type 5

opt

f6(s)
13 13.5 1 10 2 9.5 3 8.5 4 6.5 13 0
12 13 1 9 2 9 3 8 4 6 12 0
11 12 1 8.5 2 8 2 7 3 5.5 11 0
10 11 1 8 2 7 2 6.5 3 5 10 0
9 10 1 7 1 6.5 2 6 3 4.5 9 0
8 9.5 1 6 1 6 2 5 2 4 8 0
7 9 1 5 1 5 1 4.5 2 3.5 7 0
6 4.5 0 4.5 1 4 1 4 2 3 6 0
5 4 0 4 1 3.5 1 3 1 2.5 5 0
4 3 0 3 0 3 1 2.5 1 2 4 0
3 2 0 2 0 2 0 2 1 1.5 3 0
2 1 0 1 0 1 0 1 0 1 2 0
1 0.5 0 0.5 0 0.5 0 0.5 0 0.5 1 0
0 0 0 0 0 0 0 0 0 0 0 0

Optimal solution: The maximum benefit possible is 13.5. Tracing forward to get the optimal solution: the optimal decision corresponding to the entry 13.5 for f1(1) is 1, therefore we should pack 1 unit of type 1. After that we have 6 capacity remaining, so look at f2(6) which is 4.5, corresponding to the optimal decision of packing 1 unit of type 2. After this, we have 6-5 = 1 capacity remaining, and f3(1) = f4(1) = 0, which means we are not able to pack any type 3 or type 4. Hence we go to stage 5 and find that f5(1) = 1, so we should pack 1 unit of type 5. This gives the entire optimal solution as can be seen in the table below:

Optimal solution
Product (i) Number of units
1 1
2 1
5 1

Applications

Heuristic algorithms have become an important technique in solving current real-world problems. Its applications can range from optimizing the power flow in modern power systems[12] to groundwater pumping simulation models[13]. Heuristic optimization techniques are increasingly applied in environmental engineering applications as well such as the design of a multilayer sorptive barrier system for landfill liner.[14] Heuristic algorithms have also been applied in the fields of bioinformatics, computational biology, and systems biology.[15]

Conclusion

Heuristic algorithms are not a panacea, but they are handy tools to be used when the use of exact methods cannot be implemented. Heuristics can provide flexible techniques to solve hard problems with the advantage of simple implementation and low computational cost. Over the years, we have seen a progression in heuristics with the development of hybrid systems that combine selected features from various types of heuristic algorithms such as tabu search, simulated annealing, and genetic or evolutionary computing. Future research will continue to expand the capabilities of existing heuristics to solve complex real-world problems.

References

  1. Eiselt, Horst A et al. Integer Programming and Network Models. Springer, 2011.
  2. Introduction to Algorithms (Cormen, Leiserson, Rivest, and Stein) 2001, Chapter 16 "Greedy Algorithms".
  3. Eiselt, Horst A et al. Integer Programming and Network Models. Springer, 2011.
  4. J.H. Holland (1975) Adaptation in Natural and Artificial Systems, University of Michigan Press, Ann Arbor, Michigan; re-issued by MIT Press (1992).
  5. Optimal design of heat exchanger networks, Editor(s): Wilfried Roetzel, Xing Luo, Dezhen Chen, Design and Operation of Heat Exchangers and their Networks, Academic Press, 2020, Pages 231-317, ISBN 9780128178942, https://doi.org/10.1016/B978-0-12-817894-2.00006-6.
  6. Wang FS., Chen LH. (2013) Genetic Algorithms. In: Dubitzky W., Wolkenhauer O., Cho KH., Yokota H. (eds) Encyclopedia of Systems Biology. Springer, New York, NY. https://doi.org/10.1007/978-1-4419-9863-7_412
  7. Fred Glover (1986). "Future Paths for Integer Programming and Links to Artificial Intelligence". Computers and Operations Research. 13 (5): 533–549,https://doi.org/10.1016/0305-0548(86)90048-1
  8. Optimization of Preventive Maintenance Program for Imaging Equipment in Hospitals, Editor(s): Zdravko Kravanja, Miloš Bogataj, Computer-Aided Chemical Engineering, Elsevier, Volume 38, 2016, Pages 1833-1838, ISSN 1570-7946, ISBN 9780444634283, https://doi.org/10.1016/B978-0-444-63428-3.50310-6.
  9. Glover, Fred, and Gary A Kochenberger. Handbook Of Metaheuristics. Kluwer Academic Publishers, 2003.
  10. Kirkpatrick, S., Gelatt, C., & Vecchi, M. (1983). Optimization by Simulated Annealing. Science, 220(4598), 671-680. Retrieved November 25, 2020, from http://www.jstor.org/stable/1690046
  11. Brief review of static optimization methods, Editor(s): Stanisław Sieniutycz, Jacek Jeżowski, Energy Optimization in Process Systems and Fuel Cells (Third Edition), Elsevier, 2018, Pages 1-41, ISBN 9780081025574, https://doi.org/10.1016/B978-0-08-102557-4.00001-3.
  12. NIU, M., WAN, C. & Xu, Z. A review on applications of heuristic optimization algorithms for optimal power flow in modern power systems. J. Mod. Power Syst. Clean Energy 2, 289–297 (2014), https://doi.org/10.1007/s40565-014-0089-4
  13. J. L. Wang, Y. H. Lin and M. D. Lin, "Application of heuristic algorithms on groundwater pumping source identification problems," 2015 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM), Singapore, 2015, pp. 858-862, https://doi.org/10.1109/IEEM.2015.7385770.
  14. Matott, L. Shawn, et al. “Application of Heuristic Optimization Techniques and Algorithm Tuning to Multilayered Sorptive Barrier Design.” Environmental Science & Technology, vol. 40, no. 20, 2006, pp. 6354–6360., https://doi.org/10.1021/es052560+.
  15. Larranaga P, Calvo B, Santana R, Bielza C, Galdiano J, Inza I, Lozano JA, Armananzas R, Santafe G, Perez A, Robles V (2006) Machine learning in bioinformatics. Brief Bioinform 7(1):86–112