Disjunctive inequalities

Authors: Derek Moore, Grant Logan, Matthew Dinh, Daniel Ladron (SYSEN 5800/CHEME 6800 Fall 2021)

Introduction

Disjunctive inequalities are a form of disjunctive constraints that can be applied to linear programming. Disjunctive constraints are applied in all disjunctive programming, which just refers to the use of logical constraints in linear inequalities, which include “Or,” And,” or "Complement of" statements. In order to solve a disjunctive, the constraints have to be converted into mixed-integer programming (MIP) or mixed-inter linear programming (MILP) constraints, which is called disjunction. Disjunction involves the implementation of a binary variable to create a new set of constraints that can be solved easily. Two common methods for disjunction are the Big-M Reformulation and the Convex-Hull Reformulation.

Method

General

When given a set of inequalities, such as $f_{1}(x)\leq 0\ \ \And \ \ f_{2}(x)\leq 0$, the disjunctive form is given by:  ${\begin{bmatrix}y\\f_{1}(x)\leq 0\end{bmatrix}}\lor {\begin{bmatrix}\neg y\\f_{2}(x)\leq 0\end{bmatrix}}.$ In order to turn the problem into a solvable MIP or MILP, logical constraints are created by using sufficiently large numbers, such as $M_{1}$ and $M_{2}$, and a binary variable y for each inequality. This is shown below by $M$, $y_{1}$, and $y_{2}$:

$f_{1}(x)\leq M\ast (1-y_{1})$

$f_{2}(x)\leq M\ast (1-y_{2})$

To set the binary variable to be mutually exclusive, the sum of the variables is set to 1 and the range is set to {0,1}.

$\sum _{i}y_{i}=1$

$y_{i}\ \epsilon \ \{0,1\}\ \$

Big-M Reformulation

Figure 1: Disjunctive inequality solution space that can be solved via disjunction using the Big-M Reformulation or the Convex-Hull Reformulation

For the Big-M reformulation, a sufficiently large number, $M$, is used to nullify one set of constraints. This is accomplished by adding or subtracting the term “$M*(1-y)$” to the upper bound and lower bound constraints, respectively, with its respective binary variable. While choosing a large M value allows for isolation, the large value also yields poor relaxation of the model space.

For example, given a solution space ${\begin{bmatrix}y\\2\leq x_{1}\leq 6\\5\leq x_{2}\leq 9\end{bmatrix}}\lor {\begin{bmatrix}\neg y\\8\leq x_{1}\leq 11\\10\leq x_{2}\leq 15\ \end{bmatrix}}$(shown graphically in Figure 1), to determine which of the solutions is optimal, the problem must be formulated such that one set of constraints is chosen. Using the Big-M Reformulation, the following MILP set would be obtained:

y Formulation

$2-M*(1-y_{1})\leq x1\leq 6+M*(1-y_{1})$

$5-M*(1-y_{1})\leq x2\leq 9+M*(1-y_{1})$

-y Formulation

$8-M*(1-y_{2})\leq x1\leq 11+M*(1-y_{2})$

$10-M*(1-y_{2})\leq x2\leq 15+M*(1-y_{2})$

Convex-Hull Reformulation

Similar to the Big-M reformulation, the convex-hull reformulation uses a binary variable, y, to constrain the set of inequalities. The first step in converting the problem into a solvable MILP is breaking all variables into a set of variables, such as ($x_{1}$ → $x_{11}$ + $x_{12}$). By adding these addition variables, it is possible to isolate what set of parameters provide for the optimal solution of the problem. Then, similar to the Big-M reformulation, a sufficiently large variable, M, is used to nullify the non-optimal variable set, such as $x_{11}$ and $x_{12}$. For the problem show in Figure 1, the following variable constraints would be formulated:

y Formulation

$0\leq x_{11}\leq M*y_{1}$

$0\leq x_{21}\leq M*y_{1}$

-y Formulation

$0\leq x_{12}\leq M*y_{2}$

$0\leq x_{22}\leq M*y_{2}$

Formulation of the numerical constraints would then be implemented:

y Formulation

$2\ast y_{1}\leq \ x_{11}\ \leq 6\ast y_{1}$

$5\ast y_{1}\leq \ x_{21}\ \leq 9\ast y_{1}$

-y Formulation

$8\ast y_{2}\leq \ x_{12}\ \leq 11\ast y_{2}$

$10\ast y_{2}\leq \ x_{22}\ \leq 15\ast y_{2}$

With the Convex-Hull transformation, the additional constraints confine the problem, such that a tighter (convex) solution space is examined compared to Big-M Formulation.

Examples

Example 1: Location for a Farmers Market

An example of a disjunctive inequality that involves m possible locations for a farmers market and n customers who would like to purchase produce from those farmers. This is convenient for customers who want to purchase produces from local farmers. There is a fixed cost to supplying each farmers market with produce from local farmers as well as a capacity. There are also demands from customers on what produces they want. The following formulation of disjunctive inequalities can be used to determine why a farmers market is needed at location $i$ for customers $j$.

${\begin{bmatrix}\sum _{j}x_{ij}\leq L_{i}\\0\leq x_{ij}\leq P_{ij},\forall j\\G_{i}\leq f_{i}+\sum _{j}l_{ij}\end{bmatrix}}\lor {\begin{bmatrix}x_{ij}=0,\forall j\\G_{i}\geq 0\end{bmatrix}}$

$P_{ij}=$ is the capacity of the transportation from farmer market i to customer j

$x_{ij}=$ is the number of produced bought by the customer j from the farmer market i

$G_{i}=$ is the amount of purchases at farmer markets i

$f_{i}=$ is the fixed cost for farmers market i

$L_{i}=$ is the capacity amount of farmer markets i

$l_{ij}=$ is the fixed cost for transportation from farmers market i to customer j

Redefining this problem into a Convex Hull form requires defining binary variables involved with each case and setting their summation to 1. For new variables derived from the original variables are created for use in each case.

$x_{ij}=x_{ij1}+x_{ij2}$

$G_{i}=G_{i1}+G_{i2}$

Now nullify the non-optimal variable sets with a large M:

$0\leq x_{ij1}\leq y_{1}M$

$0\leq x_{ij2}\leq y_{2}M$

$0\leq G_{i1}\leq y_{1}M$

$0\leq G_{i2}\leq y_{2}M$

The number of produce shipped to a farmers market $x_{ij}$ is constraint by $L_{i}$ due to the capacity of produce the farmer market can hold. The number produce shipped is also constraint by it's own capacity $P_{ij}$ that it can hold during the transportation process.

$0\leq x_{ij2}\leq P_{ij}$

$\sum _{j}x_{ij1}\leq L_{i}$

The total cost $G_{i}$ will be greater than the sum of the fixed cost of the farmers market and the capacity of the farmers market.

$G_{i}\geq f_{i}+\sum _{j}L_{ij}$

Thus, the result is there cannot be a farmers market $x_{ij2}$ at this location of $i$

$x_{ij2}=0$

Finally, the farmers market can be located in this location of $i$ for $G_{i2}$

$G_{i2}\geq 0$, ${\begin{bmatrix}x_{ij}=0,\forall j\\G_{i}\geq 0\end{bmatrix}}$

Applications

Figure 2: Wastewater system

Disjunctive inequality programming can be used to solve real world problems in various sectors. Integer programming formulations utilizing a binary decision variable on which multiple constraints depend can be reformulated into disjunctive inequality formulations.

Strip Packing Problem

The Strip Packing Problem is a well-known problem in which two dimensional rectangles, or strips, are aligned in a two dimensional grid, subject to the constraints that the strips do not overlap. One method of formulating this problem is to describe the non-overlapping constraints as a set of four statements: for an existing rectangle $A$, a new rectangle $B$ must be above, below, to the left, or to the right of rectangle $A$. Each situation represents a unique inequality constraint; for example, if $B$ is above $A$, then it must hold that the lower border of $B$ is at a greater value than the lower border of $A$ plus the height of $A$. This can be extended to remove symmetries and improve efficiency of the solutions as well. This can also be extended into three dimensions, for applications such as loading a cargo ship.

Process Scheduling

Disjunctive inequalities are invaluable for decisions within process engineering when multiple setups, reactors, or processes are possible. In process scheduling, machine and shop floor operations are scheduled in such a way to maximize production of a final product, minimize downtime, or maximize profit. Many of the decisions underlying these operations are binary: whether or not to run a machine/operation at a given time. If a machine/operation is run, constraints are required to define costs (CAPEX and OPEX), profits, thermodynamic constraints, and resources (including mass and energy balances) associated with the running machine/operation. If a machine/operation is not run, a different set of constraints is required to define idle costs and resources. This can be formulated into a disjunctive inequality formulation and solved using the described methods. The disjunctive inequality takes the form:

$MinZ=f(x)+\textstyle \sum _{k\epsilon K}c_{k}\displaystyle$

$s.t.g(x)\leq 0$

${\underset {i\epsilon D_{i}}{\lor }}{\begin{bmatrix}Y_{ki}\\r_{ki}(x)\leq 0\\c_{k}=l_{ki}\end{bmatrix}}k\epsilon K$

In this general formulation, $c_{k}$ represents the cost of enforcing a term, continuous variables represent system parameters, and constraints represent thermodynamic and resource constraints as described above .

Figure 2 shows a special case of process scheduling, a wastewater network that removes pollutants from its mixture. The task is to figure out the total cost to discharge the pollution. This wastewater system can be reformulated into a non-convex General Disjunction Programming problem shown below:

$MinZ=\textstyle \sum _{k\epsilon PU}CP_{k}\displaystyle$

$f_{k}^{j}=\textstyle \sum _{i\epsilon M_{k}}f_{i}^{j}\displaystyle$ $\forall jk\in MU$

$\textstyle \sum _{i\epsilon S_{k}}f_{i}^{j}\displaystyle =f_{k}^{j}$ $\forall jk\in SU$

$\textstyle \sum _{i\epsilon S_{k}}\zeta _{i}^{j}\displaystyle =1$ $k\in SU$

$f_{k}^{j}=\textstyle \zeta _{i}^{k}f_{k}^{j}\forall _{j}\displaystyle$ $i\in S_{k}$ $k\in SU$

${\underset {h\epsilon D_{k}}{\lor }}{\begin{bmatrix}y\\f_{i}^{j}=\mathrm {B} _{i}^{jh},i\epsilon OPU_{k},i^{i}\epsilon IPU_{k},\forall _{j}\\F_{k}=\sum _{j}f_{i}^{j},i\epsilon OPU_{k}\\CP_{k}=\partial _{ik}F_{k}\end{bmatrix}}k\epsilon PU$

$0\leq \zeta _{i}^{k}\leq 1$ $\forall j,k$

$0\leq f_{i}^{j},f_{k}^{j}$ $\forall i,j,k$

$0\leq CP_{k}$ $\forall k$

$YP_{k}^{h}\in$ {True, False} $\forall h\in D_{k}\forall k\in PU$

Conclusion

As shown, disjunctive inequalities can be used to formulate various different types of mixed-integer program linear and nonlinear programs where binary decisions determine constraint sets. Two methods that are used to reformulate the problem are Convex Hull and Big-M reformulations. It could be shown that to obtain the convex hull of a 0 or 1 mixed-integer program, it suffices to take the convex hull of each 0 or 1 variable at a time . Implementing the Big-M method generates a much smaller MILP/MINLP with a tighter relaxation than the convex-hull method, providing more efficient computational solutions. Disjunctive inequalities can also be used to improve the performance of any general purpose Branch-and-Cut algorithm as shown on the research from Balas and Bonami . Many of the real world problems that can be solved through disjunctive inequalities involve process optimization where various binary decisions have to be made to optimize the solution.